服务质量测量技术及其应用

文章在概述服务质量测量技术的基础上，介绍了服务质量测量技术的服务质量性能评估、网络推测、网络定位等应用，并给出了服务质量测量的一般数学模型。     

TBM末端机动弹道预测

TBM末端机动弹道的预测是现代防空C^3I系统建模中重要的组成部分，它直接影响着反导武器系统对TBM拦截的精度与概率。为了精确地预测出处于末端机动条件的TBM弹道，并满足防空作战实时性的要求，本文在广义卡尔曼滤波的基础上提出了一种基于输入估计的自适应滤波方法。结论表明，该方法较其它方法更适应于解决TBM末端机动弹道预测问题，具有很好的军事应用价值。     

时频域自动识别与压制高频噪声

本文在分析张宇等及钱忠平等提出的高频噪声判别准则基础上,利用夏洪瑞等根据在窄档等频距小波分频之后识别、压制高频噪声的思路,提出在时频域将代表地震道主要能量的几个频带的平均振幅绝对值作为正常子波的平均振幅绝对值,以此来识别和压制高频噪声的异常振幅。实际处理结果表明,此法不仅可以压制高频谐振及高频突发噪声,而且可以保护弱地震反射信号不受损害。     

Characterization of Austempered Ductile Iron Through Barkhausen Noise Measurements

The outstanding mechanical properties of austempered ductile irons (ADI) are linked to the microstructure of the matrix obtained by subjecting a ductile iron with an appropriate composition to a heat treatment called austempering. Then the microstructure of the matrix consists of bainitic ferrite with different volume fractions of retained austenite. The aim of this work is to use the magnetic Barkhausen noise (MBN) as a nondestructive method for characterizing the microstructure of ADI. First, it is shown that the amplitude and position of the peak-shaped MBN response is quite sensitive to the microstructure of the matrix of ductile irons. Thus each type of constituent (equiaxial ferrite, pearlite, martensite or bainite) exhibits a typical response and, in turn, it can be identified from the MBN response. Furthermore, a good correlation is found between MBN signal parameters and ADI heat treatment parameters, indicating that MBN is also quite sensitive to fine evolutions of the microstructure of ADI. MBN peak position is especially sensitive to the type of bainite, whereas peak amplitude is linked to the progress of the bainite reaction. Hence MBN measurements appear to be a powerful tool to assess some important microstructural features of ADI castings.     

一种基于混沌同步的噪音衰减算法

论文提出了一种混沌通信系统的噪音衰减算法,该算法利用混沌同步现象在接收端获得正确的噪音估计值,从而从接收信号中滤除噪音恢复出正确的信号。通过数值仿真试验表明该方法是可行的。     

Accurate estimation of capacities and cross-traffic of all links in a path using ICMP timestamps

The estimation of the link capacity and its available bandwidth in an end-to-end path is crucial for network management, admission control and flow control for adaptive applications. This paper introduces an estimation mechanism able to accurately estimate the available bandwidth of all links in an end-to-end path, through its capacity and cross-traffic estimation. The estimation procedures resort to the dispersions of packet pairs and trains using the concepts of ICMP Timestamp and Traceroute that, efficiently used together, enable the measurement of the dispersions in all links in the path. These mechanisms were evaluated through simulation experiments, where we analyzed the influence of the several network parameters on each estimation mechanism. The results show that these estimation methods are able to accurately estimate both the capacity and the cross-traffic of all links in a path with moderate length and with low overhead.     

Impulsive Noise Suppression from Highly Distorted Images with Triangular Interpolants

In this paper a new filter, Triangular Interpolant Based Impulsive Noise Suppression Filter (SF), is proposed to restore images corrupted by fixed valued impulsive noise (IN). The proposed filter comprises two main stages: detection of noise and restoration of corrupted pixels. The SF achieves the restoration of the detected noisy pixels by using one of the Triangular Interpolant techniques and leaves the other pixels unaltered. Simulation results reveal that the proposed filter shows better performance than the highly approved IN suppression filters across a wide noise density ranging from 10% to 90%. The proposed filter also perfectly achieves the robustness anddetail preservation with reduced computational complexity.     

基于矢量平均的信道估计算法

提出一种适用于DS-CDMA无线通信系统的低计算量而性能良好的信道估计算法。在DS-CDMA系统中，当接收信号经过解扩或多用户检测等时域预处理后，可以认为干扰大大减弱、期望信号在处理后的信号中占主要地位。这样，用预处理后信号相关阵的最大特征值对应的特征矢量可以很好地近似期望信号的信道矢量。但是，直接特征分解需要很大的计算量，特征跟踪计算量较低，但瞬态性能较差。本文提出一种基于相关矩阵列矢量平均的信道估计算法，该算法不需要特征分解或跟踪。仿真结果表明：新算法在降低计算量的情况下可以获得同直接特征分解方法几乎相同的性能。     

Characteristic Features of the Optimal Processing of the Results of Measurements in the Case of a Random Observation Function

An analysis is made of the characteristic features and problems of the optimal processing of the results of measurements in the case of a random observation function utilizing a nonlinear Kalman filter. A method is proposed for increasing the convergence domain of the filter with additional processing of measurements in the frequency domain.     

高分辨率地震资料处理中的优化速度分析方法

速度分析是地震资料处理过程中的重要一环。速度分析的质量直接影响动静校正,继而影响叠加成像以及偏移归位。针对如何优化速度分析,提出了基于道集资料噪音衰减、道集内相位时差校正、道集优化处理以及速度拾取应用约束等过程的优化速度分析方法。该方法在实际资料处理中取得了很好的效果。